Продукти за aiumprofil 80x80 (19)

IRIS is an acrylic cement paint, for interior and exterior use based on acrylic resins. It is recommended for building surfaces such as concrete, plaster, bricks, etc. It has a highly whitening and covering effect and it is also protective against humidity, high temperature and heavy weather conditions.

Protech AC-P Paint based on acrylic resins in aqueous emulsion, for interiors and exteriors, protective lamellar structure which, in addition to having an aesthetic effect, allows maximum filling, transpiration and very high resistance to mechanical and chemical light. The high coverage and expandability make this product extremely easy to apply. The special acrylic resins that compose it allow to obtain a film characterized by a rapid insensitivity to water even during the drying phase, with a consequent reduction of the "snail effect" in the event of atmospheric events. Protective and decorative finish painting of walls, facades, concrete products, plasters, masonry, natural stone, porous substrates in general. For old plasters, pay particular attention to the old pre-existing paints, which must be removed by careful scraping and brushing in order to obtain a healthy and non-friable support; then proceed with the application of Protech Fix AC fixative. When applying on new plasters, it is good practice to insulate the base with acrylic insulator or even better with a white or neutral microemulsion fixative. Avoid windy or cold days when applying. Do not apply on fresh or particularly alkaline substrates, respect a minimum carbonation period of at least four weeks. On large surfaces it is recommended to apply product from the same batch and always proceed wet on wet to avoid signs of recovery. Never operate with temperatures below + 5 ° C. Rainy weather, excessive atmospheric humidity and temperatures below + 8 ° C can greatly compromise drying with the possibility of washing off by rainwater even after several days. . DILUTION (by volume with drinking water) BRUSH 1st COAT: 15% a crossed coat or two coats 12-24 hours apart 2nd COAT: 10%. ROLLER 1st COAT: 10% 2nd COAT: 10%. SPRAY (through specific equipment) 1st COAT: 15/25% 2nd COAT: 15/25%. To avoid filming defects, being resin-based products in aqueous emulsion, the application temperature must be between + 5 ° C and + 35 ° C with relative humidity not higher than 60/70%. Do not apply under the direct action of the sun and wind. Do not apply on fresh or particularly alkaline substrates, respect a minimum drying period of the substrate of at least four weeks. It is also advisable for colored, not to use on large surfaces dyed with different production batches as slight differences between batch and batch are technically possible. Please check the color before application as we will not respond to any disputes regarding the shade of the applied product. From 0.20 to 0.30 liters of Protech AC-P for each square meter of surface to be painted. Pail 14 l

SANDING FFP 0320Flat foam pad - 150 x 150mm - Primer prep FFP 0500Flat foam pad - 150 x 150mm - Base coat prep FFP 0800Flat foam pad - 150 x 150mm - Clear coat prep FFP 1500Flat foam pad - 150 x 150mm - Clear coat fade

Highly effective water repellent, mainly for polymer-sealed concrete products. Provides strong water repellent effect, minimizes capillary water absorption, minimizes efflorescence.

DIM Ltd. - PACIFIC Furniture Equipment Products Floor Protectors Eva Floor Protector Pads 120X240mm Color chart 120x240mm Material: Eva Thickness: 2,5mm *The material is laminated to silicone coated paper by using Hot-Melt glue.

Schneidunterlage PLP Menge/Format: 1 Unterlage 1.450 mm x 1.150 mm Stärke: ca. 2.5 mm Farbe: Schwarz Artikel-Nr:50310001 Hersteller:Diverse

Wasserbasierte, dünnschichtige, deckende Holzbeschichtung auf Lignovit Ultramatt W10 Weiß, tönbar Besondere Eigenschaften Enthält keine Wirkstoffe von chemischen Holz- und Filmschutzmitteln Französische Verordnung DEVL1104875A über die Kennzeichnung von Baubeschichtungsprodukten auf ihre Emissionen von flüchtigen Schadstoffen: A+ Auftragsart Streichen Airless Becherpistole

Sullo store online di AS Protezioni è possibile trovare in vendita online lamiere in alluminio anodizzato, lamiere in ferro zincato e pannelli in policarbonato. Le lamiere - di diverso spessore - possono essere acquistate su misura.

AFR-OMEGA LD x CD x L x e:160 x 40(52) x 24 x 1,5, 160 x 40(52) x 24 x 2,160 x 40(52) x 24 x 3 ACIER kg/m²:10,8, 14,4, 21,6 ALUMINIUM kg/m²:3,6, 4,8, 7,2 Formats maxi Panneaux mm:LD1000/1250/1500 x 3000 ou LD2000/2500 x 1600 maxi Epaisseur apparente (interne) mm:16 Vide frontal % Vide maxi:15 env.46

Bitumen mastic has a wide range of applications in the construction industry. Here are some common uses: Roofing: Bitumen mastic is commonly used in roofing applications to seal and repair leaks, fill gaps and cracks, and bond roofing materials together. Concrete Repair: It is used to repair cracks and holes in concrete surfaces, such as floors and walls. Waterproofing: It is used to create a waterproof seal around pipes, vents, and other penetrations through walls and roofs. Metal Bonding: It is used to bond metal sheets and panels together in roofing and cladding applications. Masonry: Bitumen mastic is used to bond masonry materials, such as bricks and blocks, together in construction applications. Sealing: Bitumen mastic is used to seal joints, seams, and gaps in various materials, such as wood, metal, and concrete.

As Afra Profile, we’d be glad to provide your needs of following products: -Suspending Ceiling Drywall Profiles (Ceiling U – Ceiling C – Ceiling L Profiles) -Wall Drywall Profiles (Wall U – Wall C Profiles) -Omega Profiles -Plaster/Gypsum and Painting Profiles -Suspending Ceiling -Suspending Ceiling Accessories (Clips, Hanger, Steel Dowel, Agrafe, Hanger wire…etc) -Aluminium Ceiling Tile and Ceiling Tile T-24 Profiles -Intervention Cover/Plasterboard Access Pannels -Optional Special Profiles from Galvanized Sheet Metal

1- Çok ağır olsa dahi Granit ve Mermer kaplama malzemelerini, İç ve Dış cephe duvarlarına Yüksek Mukavemetle Yapıştırma özelliğine sahiptir. 2- MULTIYAP M SUPER Ağır malzemeleri yapıştırma özelliğine sahip olsa da Malzeme yükü bakımından oldukça hafiftir. 3- 20 kg MULTIYAP M SÜPER ile 6 mm taraklı mala kullanılarak 12 m2 lik uygulama alanına rahatlıkla ulaşabilirsiniz. 4- Hafifliği sayesinde inşaatlarda işçilik ve nakliye maliyetlerini düşürerek büyük oranda tasarruf sağlar. 5- Esnektir ve çalışma süresi uzatılmıştır. 6- Yüksek Mukavemetli Yapıştırma Özelliğine sahiptir. 7- Tek Komponentlidir.

PORTE ET COTÉ VISIBLE: OUVERT POIGNÉES: SANS QUINCAILLERIE: TIROIR – BLUM ( TANDEMBOX OU LEGRABOX ) OU SIMILAIRE ACESSOIRE INTERIEUR: PORTE-CHAUSSURE MÉTALLIQUE,PANDERIE EN ALUMÍNIUM,PORTE-PANTALON COULISSANT,PANDERIE BASCULANTE,SEPARATION PORTE BIJOUX AVEC TIROIR EN VERRE

Effective water repellent for concrete products. Strong water repellent effect, reduction of capillary water absorption, minimizes efflorescence.

Walzgrund für Holz auf Basis UV-vernetzbarer Polyacrylatharze; verleiht UV-AC-Walzlackaufbauten eine ausgezeichnete Haftung zum Untergrund bei starker mechanischer Belastung. Innolux Primer Auftragsart Walzen

AFR-URBAN LD x CD x L x e:R100 x 30 x 13 x 1,5, R100 x 30 x 13 x 2 ACIER kg/m²:10,4, 13,4 ALUMINIUM kg/m²:3,55, 4,7 Formats maxi Panneaux mm:LD1000/1250/1500, CD > 3000 Epaisseur apparente (interne) mm:13 Vide frontal % Vide maxi:17 env.

Wasserbasierte, farblose Holzschutzimprägnierung mit bioziden Wirkstoffen speziell für Nadelholz wie Fichte, Tanne, Kiefer und Lärche im Außenbereich. Enthält Lichtschutzmittel zur Absorption der UV-Strahlung und Stabilisierung des Holzbestandteiles Lignin. Gleichmäßige Saugwirkung besonders auf Nadelholz. Lignovit Protect-Primo Farblos Besondere Eigenschaften Die verwendeten Wirkstoffe bieten den laut ÖNORM B 3802-2 bzw. DIN 68800-3 geforderten Schutz vor Bläue (Prüfung nach EN 152-1), holzzerstörenden Pilzen (Prüfung nach EN 113) und wirken vorbeugend gegen Insektenbefall (Prüfung nach EN 46). Auftragsmenge bei Normprüfung 100 - 120 g/m². Wirkstoffe (B, P, Iv) 9 g / kg (0,9 %) IPBC (Iodpropinylbutylcarbamat) 2,5 g / kg (0,25 %) Tebuconazol 0,5 g / kg ( 0,05%) Polymeres Betain 1 g / kg (0,1 %) Permethrin Auftragsart Streichen Tauchen, Fluten Vacumat

AFR-luceRnA LD x CD x L x e:150 x 56(56) x 21,5 x 1,5, 150 x 56(56) x 21,5 x 1,5 ACIER kg/m²:9,3, 12,4 ALUMINIUM kg/m²:3,1, 4,2 Formats maxi Panneaux mm:LD1000/1250/1500 x 3000 ou LD2000/2500 x 1800 maxi Epaisseur apparente (interne) mm:21 Vide frontal % Vide maxi:30 env.71

Wasserbasierte, dünnschichtige Holzlasur auf Basis von Acrylat- und Alkydharzdispersionen, hervorragend zu verarbeiten, hohe Blockfestigkeit, gute Wetterbeständigkeit. Lignovit Color W10 Weiß, tönbar Besondere Eigenschaften Die Beschichtung ist durch einen bioziden Wirkstoff gegen Bläue- und Schimmelpilzbefall geschützt. Wirkstoff: 0,3% IPBC (0,3 g / 100 g) (3-Iodpropinylbutylcarbamat) Französische Verordnung DEVL1104875A über die Kennzeichnung von Baubeschichtungsprodukten auf ihre Emissionen von flüchtigen Schadstoffen: A+ Auftragsart Streichen